Equipment Symbols - HP StorageWorks 1510i - Modular Smart Array Service Manual

If you do not have any of the suggested equipment for proper grounding, have an Authorized HP
Reseller install the part.
NOTE:
For more information on static electricity or assistance with product installation, contact your HP
Authorized Reseller.

Equipment symbols

The following symbols may be located on equipment in areas where hazardous conditions may exist.
WARNING!
Any enclosed surface or area of the equipment marked with these symbols indicates the presence of
electrical shock hazards. Enclosed area contains no operator serviceable parts. To reduce the risk of
injury from electrical shock hazards, do not open this enclosure.
WARNING!
Any RJ-45 receptacle marked with these symbols indicates a network interface connection. To reduce the
risk of electrical shock, fire, or damage to the equipment, do not plug telephone or telecommunications
connectors into this receptacle.
WARNING!
Any surface or area of the equipment marked with these symbols indicates the presence of a hot surface
or hot component. Contact with this surface could result in injury.
WARNING!
Power supplies or systems marked with these symbols indicate the presence of multiple sources of power.
WARNING!
Any product or assembly marked with these symbols indicates that the component exceeds the
recommended weight for one individual to handle safely.
34
Customer replaceable components