Modifications; Cables; Laser Compliance - HP StorageWorks 1510i - Modular Smart Array Service Manual

Hp storageworks 1510i modular smart array maintenance and service guide (383072-002, july 2008)
Hide thumbs Also See for StorageWorks 1510i - Modular Smart Array:
Table of Contents

Advertisement

For questions regarding your product, contact:
Hewlett-Packard Company
P. O. Box 692000, Mail Stop 5301 13
Houston, Texas 77269-2000
Or, call
1-800- 652-6672
For questions regarding this FCC declaration, contact:
Hewlett-Packard Company
P. O. Box 692000, Mail Stop 510101
Houston, Texas 77269-2000
Or, call
(281) 514-3333
To identify this product, refer to the Part, Series, or Model number found on the product.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not
expressly approved by Hewlett-Packard Company may void the user's authority to operate the equipment.

Cables

Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods
in order to maintain compliance with FCC Rules and Regulations.

Laser compliance

This product may be provided with an optical storage device (that is, CD or DVD drive) and/or fiber
optic transceiver. Each of these devices contain a laser that is classified as a Class 1 Laser Product in
accordance with US FDA regulations and the IEC 60826–1. The product does not emit hazardous
laser radiation.
WARNING!
Use of controls or adjustments, or performance of procedures other than those specified herein, or in
the laser product's installation guide, may result in hazardous radiation exposure. To reduce the risk
of exposure to hazardous radiation:
Do not try to open the module enclosure. There are no user-serviceable components inside.
Do not operate controls, make adjustments, or perform procedures to the laser device, other than
those specified herein.
Allow only HP Authorized Service technicians to repair the unit.
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration
implemented regulations for laser products on August 2, 1976. These regulations apply to laser products
manufactured from August 1 1976. Compliance is mandatory for products marketed in the United States.
70
Regulatory compliance and safety

Advertisement

Table of Contents
loading

Table of Contents