Hp Smart Array P400 Controller 256-Mb Cache Module - HP StorageWorks SB40c Maintenance And Service Manual

5. Replace the component by reversing the removal procedure.

HP Smart Array P400 Controller 256-MB cache module

To remove the component:
1. Power down the partner server blade.
2. Remove the SB40c.
3. Remove the access panel.
4. Disconnect the battery cable from the cache.
CAUTION:
Disconnect the cable from the cache module only if the battery pack is not being used to recover
data from the server or transfer data to another server.
5. Remove the cache module from the controller.
HP StorageWorks SB40c Storage Blade 23