Removing The Chassis Components; Prepare For The Replacement; Remove The 2-Port Ethernet Iscsi I/O Modules; Remove The Fan Modules - HP StorageWorks 1510i - Modular Smart Array Service Manual

Removing the chassis components

Prepare for the replacement

1. Review all warnings, cautions, and preparation procedures as detailed in
2.
If the MSA is operational, stop all access to the MSA.
3. Press and hold the Power on/Standby button for five seconds to place the MSA in Standby mode.
4. Label each cable carefully and then disconnect all of the cables.

Remove the 2-Port Ethernet iSCSI I/O modules

1. Lift the port-colored latch and pull the module out of the chassis.
2. Remove the other I/O module or blank.

Remove the fan modules

1. Lift the port-colored latch and pull the module out of the chassis.
2. Remove the other fan module.
62
Customer replaceable components
Warnings and precautions.