Installing The Scsi I/O Module; Verifying Proper Operation - HP StorageWorks 1510i - Modular Smart Array Service Manual
Hp storageworks 1510i modular smart array maintenance and service guide (383072-002, july 2008)
Hide thumbs
Also See for StorageWorks 1510i - Modular Smart Array:
- User manual (160 pages) ,
- Release note (7 pages) ,
- Installation instructions (4 pages)
Table of Contents
Advertisement
3.
Lift the port-colored SCSI I/O module latch (1) and pull the SCSI I/O module out of the chassis (2).
Installing the SCSI I/O module
1.
Slide the replacement SCSI I/O module into the MSA chassis bay until the module clicks into place.
2.
Reconnect all SCSI cables.
NOTE:
Ensure that all of the SCSI cable connectors are fastened tightly.
Verifying proper operation
After replacing the failed SCSI I/O module, verify that:
•
The SCSI I/O module Status LED is solid green.
•
No new error messages are displayed on the array controller LCD panel.
newpage pi
58
Customer replaceable components
Advertisement
Table of Contents
Need help?
Do you have a question about the StorageWorks 1510i - Modular Smart Array and is the answer not in the manual?
Questions and answers