Screen Status Read Command Table; Lamp Status Read Command Table; Sound Status Read Command Table; Setting Status Read Command Table - Sanyo PLC-WTC500AL - 5000 Lumens Manual

PLC-WTC500L Expand Serial Command Functional Specifications
CR_IDSLOT3[CR]
CR_IDSLOT4[CR]

6.5 Screen Status Read Command Table

Status Read command
CR_SCREEN [CR]
CR_CEIL [CR]
CR_REAR [CR]
CR_KYSTNMODE[CR]
CR_VSCALE[CR]
CR_VPOS[CR]
CR_HSCALE[CR]
CR_HPOS[CR]

6.6 Lamp Status Read Command Table

Status Read command
CR_LAMPREPL [CR]
CR_LAMPH [CR]
CR_LAMPCORRESPH [CR]
CR_LAMPMODE [CR]
CR_PROJH [CR]
CR_HMLAMP[CR]
CR_LAMPCONTRL [CR]
CR_LAMPLIFECONTRL [CR]
CR_LAMPCHGTIM[CR]
CR_LAMPCHGSTA[CR]
CR_LAMPINTERVAL [CR]

6.7 Sound Status Read Command Table

Status Read command
CR_VOLUME[CR]
CR_MUTE[CR]

6.8 Setting Status Read Command Table

Status Read command
CR_LANG [CR]
CR_LOGO [CR]
CR_LOGOLOCK[CR]
CR_PIP[CR]
CR_PIPSIZE[CR]
CR_PIPPOSITION[CR]
CR_BACKGND [CR]
CR_POINTER[CR]
CR_RCODE [CR]
CR_RCSENSOR [CR]
CR_RTYPE [CR]
CR_DISP [CR]
CR_STANDBYMODE[CR]
CR_P-MANE [CR]
CR_P-MANETIME [CR]
CR_ON-STA [CR]
CR_FANSPEED [CR]
CR_SLANT[CR]
CR_SHUTRCPROT[CR]
Get ID information of Input3
Get ID information of Input4
Get selected screen size
Get setting status of Ceiling
Get setting status of Rear
Get selected Keystone store mode
Get setting status of V Scale
Get setting status of V Position
Get setting status of H Scale
Get setting status of H Position
Get information of Lamp replacement time
Get information of actual Lamp running time
Get lamp running time multiplied by a coefficient
Get selected Lamp control
Get total running time of projector
Get the number of lamps
Get setting status of Lamp mode
Get setting status of Lamp life control
Get setting status of Timer for Lamp1/2 of Lamp mode
Get setting status of Timer start for Lamp1/2 of Lamp
mode
Get setting status of Lamp interval
Get Volume value
Get Sound Mute setting status
Item
Get selected language
Get setting status of Logo
Get setting status of Logo Lock
Get setting status of "Picture in Picture"
Get setting status of Screen size of "Picture in Picture"
Get setting status of position of "Picture in Picture"
Get setting status of Screen for no signal
Get setting status of Pointer
Get selected Remote Control code
Get setting status of Remote Control Sensor(Enable/Disable)
Get supported Remote Control type (IR/RF)
Get setting status of Display
Get setting status of Standby-mode
Get Power management setting status
Get setting time for Power Management
Get ON Start setting status
Get selected Fan Control Speed
Get setting status of Slant
Get remote controller disability status of the shutter
Item
Item
Item
14/75