Status Read Command Table; Image Status Read Command Table; Pc Adjust Status Read Command Table; Video Status Read Command Table - Sanyo PLC-XK2200 - 2200 Lumens Manual

PLC-XK2200 /2600 /XK3010

6. Status Read Command Table

6.1 Image Status Read Command Table

Status read command
CR_BRIGHT[CR]
CR_CONT[CR]
CR_COLOR[CR]
CR_TINT[CR]
CR_IRIS[CR]
CR_SHARP[CR]
CR_GAMMA[CR]
CR_WBAL-R[CR]
CR_WBAL-G[CR]
CR_WBAL-B[CR]
CR_COLTEMP[CR]
CR_NZRED[CR]
CR_PROGV[CR]
CR_IMAGE[CR]
CR_IMGGMD[CR]
CR_COLBOARD[CR]

6.2 PC Adjust Status Read Command Table

Status read command
CR_FSYNC[CR]
CR_TDOTS[CR]
CR_CLAMP[CR]
CR_H-POS[CR]
CR_V-POS[CR]
CR_DDOTS[CR]
CR_DLINE[CR]
CR_PCSTORE[CR]

6.3 Video Status Read Command Table

Status read command
CR_SERSYS[CR]

6.4 Input Status Read Command Table

Status read command
CR_INPUT[CR]
CR_SOURCE[CR]
CR_SRCINP1[CR]
CR_SRCINP2[CR]
CR_SRCINP3[CR]
CR_SYSTEM[CR]
CR_SYSLIST[CR]
CR_MODELIST[CR]
Expand Serial Command Functional Specifications
Get Brightness value
Get Contrast value
Get Color value
Get Tint value
Get Iris value
Get Sharpness value
Get Gamma value
White Balance Red value
White Balance Green value
White Balance Blue value
Get setting value of Color temperature
Get setting status of Noise reduction
Get setting status of Progressive scan
Get Selected Image status
Get setting value of Image Gamma
Get Selected Colorboard mode
Get setting value of Fine Sync
Get setting value of Total Dots
Get setting value of Clamp
Get setting value of Horizontal Position
Get setting value of Vertical Position
Get setting value of Display Dots
Get setting value of Display Line
Get Free or Stored status for PC Adj. mode1-10
Get selected current signal. When in Auto mode, it
returns a result by Auto detect.
Get selected Input No.
Get selected source of currently selected Input
Get selected source of Computer 1
Get selected source of Computer 2
Get selected source of Video
Get selected system status in Input mode
Get selectable System table
Get selectable Mode table
13 / 73
Item
Item
Item
Item