When Business Continuity Manager Agent Is On The Local Site And A Remote Site - HP StorageWorks P9000 Software Installation Manual

Table 32 Settings to Connect Business Continuity Manager Agents Installed on the Local Site to
P9000 Replication Manager
Prefix
ACCOUNT
INFO
The following shows an example of specifying the settings shown in
initialization parameters.
SETINIT PORT(24042)
SETINIT MODE(EDIT)
SETINIT LOCK(PREFIX)
/* PREFIX */
SETINIT PREFIX('ACCOUNT','NY', 'ROUTE1', * ,'LA')
SETINIT PREFIX('INFO','NY','ROUTE2','NY2','LA')

When Business Continuity Manager Agent Is on the Local Site and a Remote Site

This subsection explains how to specify initialization parameters when Business Continuity Manager
agent is on both the local site and a remote site. In such cases, configure the Business Continuity
Manager agents on the local and remote sites so that they can perform local scans for their
respective sites.
The following example configuration is used to explain the specification method.
74 Setting Up the Environment When Linking with P9000 Replication Manager
Local Site
Port Number DADID
24042 NY
Route List ID Non Gen'ed
(Forward DADID
Direction)
ROUTE1 No specification
ROUTE2 NY2
Table 32 (page 74)
Remote Site
DADID
LA
for