Transferring Audit Log Files To Syslog Servers - HP StorageWorks P9000 Reference Manual

4. Click
5. Perform the following if using a primary FTP server.
1. Select Enable in Output to Primary Server.
2. Enter the IP Address in the Primary Server Setting. Do not enter the periods.
3. Enter the User ID and the Password you use to login the primary FTP server.
4. Enter the output folder to which the audit log file will be sent. Specify a relative directory
from the home directory as that folder.
6. Perform the following if using a secondary FTP server.
1. Click Enable in Output to Secondary Server.
2. Enter the IP Address in the Secondary Server Setting. Do not enter the periods.
3. Enter the User ID and the Password you use to login the secondary FTP server.
4. Enter the output folder to which the audit log file will be sent. Specify a relative directory
from the home directory as that folder.
7. Click Apply.
8. Confirm that the FTP server setting is correct, then click Transfer and manually transfer the
audit log file. A message displays indicating that the transfer has completed.
Troubleshooting
A SIM notifies a storage administrator than an FTP transfer has failed. This can occur when the
audit log file is not transferred to an FTP server because either the FTP server or LAN has failed.
You can view the SIM in the Alerts window. The reference code for a failed FTP transfer is 7C0300.
If a SIM occurs, do the following:
Resolve the error on the FTP server or LAN, and then manually transfer the audit log file by
clicking Transfer in the Audit Log Transfer window. Then complete the instructions in the SIM
in the Audit Log Transfer window.
If the error condition cannot be resolved, download the audit log file to the Remote Web
Console computer.
If you change the configuration in the Audit Log Transfer window (when the items set in the window
appear in blue italic letters), click Apply and apply the configuration in the window to the storage
system, and then click Transfer.
Manual Transfer
To transfer the audit log file manually from the SVP to the FTP server:
1. Click Settings Security Audit log Transfer. The Audit Log Transfer window appears.
2. Click
3. Click Transfer. A message appears indicating that the transfer has completed.

Transferring audit log files to syslog servers

If you configure syslog server settings, the audit log will always be transferred to the syslog server.
Prerequisites
User Datagram Protocol (UDP) is required for transferring the audit log to syslog servers.
Consider the characteristics of UDP in the network setting when audit logs are transferred to
24 Using audit logs
to change to Modify mode.
to change to Modify mode.