[Prov] Set Fibre Address; [Prov] Set Fibre Topology; [Prov] Set Host Mode - HP StorageWorks P9000 Reference Manual

Item
UserName
Num. of Grps

[PROV] Set Fibre Address

This log is output when LUN Manager operation is performed using Configuration File Loader.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set Fibre Address,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Fibre Addr.}=[{XX,0xXX(xx)},{XX,0xXX(xx)}],Num. of Ports=2
Detailed information
Item
Port
Fibre Addr.
Num. of Ports

[PROV] Set Fibre Topology

This log is output when LUN Manager operation is performed using Configuration File Loader.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set Fibre Topology,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Fabric,Connection}
=[{XX,Enable,FC-AL},{XX,Disable,FC-AL},
{XX,Enable,P-to-P},{XX,Disable,P-to-P}],Num. of Ports=4
Detailed information
Item
Port
Fabric
Connection
Num. of Ports

[PROV] Set Host Mode

This log is output when LUN Manager operation is performed using Configuration File Loader.
Description
The user name of the host group.
The number of host groups where authentication parameter has been set.
Description
The name of the port that the fibre address has been set.
Fibre Addr. displays the address of Fibre Channel port after the setting.
The outside of the parentheses indicates AL-PA (arbitrated-loop physical address), and the inside
of parentheses indicates the loop ID.
The number of ports where address has been set.
Description
The name of the port where the topology of Fibre Channel is set.
Indicates whether the Fabric switch is enabled or disabled.
Enable: Enabled, Disable: Disabled
The connecting mode of the Fabric switch selected.
FC-AL: FC-AL is selected, P-to-P: P-to-P is selected
The number of ports where the topology of Fibre Channel is set.
Provisioning descriptions 141