[Prov] Edit Host - HP StorageWorks P9000 Reference Manual

Detailed information
Item
LDKC:CU:LDEV
Attribute
RT
Result
Num. of LDEVs
*
When bit 5, 6, and 7 are all 0 (zero), Read/Write has been set.

[PROV] Edit Host

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit Host,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,HostGrpID,WWN,Change WWN,Change Nickname}
=[{XX,0xXXX,0xXXXXXXXXXXXXXXXX,0xXXXXXXXXXXXXXXXX,
XXXXXXXXXXXXXXXX}],
Num. of WWNs=1
Detailed information
Item
Port
HostGrpID
WWN
Change WWN
Change Nickname
Num. of WWNs
122 Audit log examples
Description
The LDKC, CU, and LDEV numbers of the logical volume where the attribute is set.
The set attribute in hexadecimal. Each bit (0–7) of 1 byte corresponds to the setting item. 1 is
assigned to each bit when the setting is enabled and 0 (zero) is assigned to each bit when
the setting is disabled. Each bit represents the following attributes:
Bit 0: Mounting of LEDV (fixed to 1)
Bit 1: Setting of S-VOL Disable
Bit 2: Setting of Zero Read Cap mode
Bit 3: Setting of Invisible mode
Bit 4: Setting of reserve
*
Bit 5: Fixed to 0 (zero)
Bit 6: Setting of Read Only attribute
Bit 7: Setting of Protect attribute
When 0x88 is output to the attribute, for example, Read/Write attribute is set to the logical
volume to show that the reserve setting has been enabled.
A hyphen (-) is output when a setting is not changed.
The number of days set in Retention Term.
A hyphen (-) is output when a setting is not changed.
The result of operation.
Normal end: Normal end, Error (xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of the logical volume(s) where the attribute has been set.
Description
The name of the port where the host is connected.
The host group number on which the host with WWN or nickname of the host bus adapter
being changed is registered.
Indicates WWN of the host bus adapter before change. WWN is represented in hexadecimal.
Indicates WWN of the host bus adapter after change.
The nickname of the host bus adapter after change.
The number of host bus adapters (WWN) where the settings have been changed.
*
*