[Install] Set Commanddevsec; [Install] Set Devgrpdef; [Install] Set Fibre Address - HP StorageWorks P9000 Reference Manual

Detailed information
Item
LDKC:CU:LDEV
CommandDev
Num. of LDEVs

[Install] Set CommandDevSec

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set CommandDevSec,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,CommandDevSec}=[{0x00:0xXX:0xXX,Disable},
{0x00:0xXX:0xXX,Enable}],Num. of LDEVs=2
Detailed information
Item
LDKC:CU:LDEV
CommandDevSec
Num. of LDEVs

[Install] Set DevGrpDef

Example
07xx, YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set DevGrpDef,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,DevGrpDef}=[{0xXX:0xXX:0xXX,Enable}],
Num. of LDEVs=1
Detailed information
Item
LDKC:CU:LDEV
UserAuth
Num. of LDEVs

[Install] Set Fibre Address

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set Fibre Address,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Fibre Addr.}=[{XX,0xXX(xx)},{XX,0xXX(xx)}],Num. of Ports=2
Description
The LDKC, CU, and LDEV numbers of the logical volume where the command device is set.
Indicates whether the command device setting is enabled or disabled.
Disable or Enable will appear.
The number of logical volumes where the command device is set.
Description
The LDKC, CU, and LDEV numbers of the logical volume where the command device is set.
Indicates whether the command device security setting is enabled or disabled.
Disable or Enable will appear.
The number of logical volumes where the command device is set.
Description
The LDKC, CU, and LDEV numbers of the volume where the device group definition is specified.
Indicates whether the device group definition is enabled or disabled.
Disable or Enable will appear.
The number of logical volumes where the device group definition is set.
Install descriptions 87