[Install] Restore Config - HP StorageWorks P9000 Reference Manual

Item
Use Duplex
SVP Kind
IPv4
IPv6
M-SVP
IPv4(IPAddress,Subnet Mask)
IPv6(IPAddress, Subnet
Prefix length)
S-SVP
IPv4(IPAddress,Subnet Mask)
IPv6(IPAddress, Subnet
Prefix length)
Example 8: removing SM PP flag
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Remove,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+PP Flag=[(64KLDEV, SI/VM Extension1, FCV2, DP, CoW, TPF),
(SI/VM Extension2, CoW Extension)],Num. of PP Flags=2
+Max Number of CUs=64
Detailed information for example 7
Item
PP Flag
Num. of PP Flags
Max Number of CUs

[Install] Restore Config.

Example 1
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Restore Config.,SVP&DKC,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
Basic information for example 1
The SVP&DKC parameter indicates the configuration of SVP and DKC has been restored.
Example 2
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Restore Config,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{New Ver.,Old Ver.}={xx-xx-xx/xx,xx-xx-xx/xx}
Description
The duplex status of the SVP.
Valid or Invalid will appear.
The kind of the duplex status.
Master SVP or Standby SVP will appear.
The status of IPv4 settings.
Valid or Invalid will appear.
The status of IPv6 settings.
Valid or Invalid will appear.
Master SVP details are provided in the format described below.
IPv4 (IPAddress: IP address, Subnet Mask: Subnet mask)
IPv6 (IPAddress: IP address, Subnet Prefix length: The value of subnet prefix)
Standby SVP details are provided in the format described below.
IPv4 (IPAddress: IP address, Subnet Mask: Subnet mask)
IPv6 (IPAddress: IP address, Subnet Prefix length: The value of subnet prefix)
Description
The flag of the program product
The number of program product flags
The maximum number of CUs
Install descriptions 85