HP P2000 Reference Manual page 6

23
Info. Vdisk creation has started.
Recommended actions
• No action required.
25
Info. The statistics for the indicated vdisk have been reset.
Recommended actions
• No action required.
27
Info. Cache parameters have been changed for the indicated vdisk.
Recommended actions
• No action required.
28
Info. Controller parameters have been changed. This event is logged when general configuration changes are
made; for example, utility priority, remote notification settings, user interface passwords, and management
port IP values. This event is not logged when changes are made to vdisk or volume configuration.
Recommended actions
• No action required.
31
Info. The indicated disk is no longer a global or dedicated spare.
Recommended actions
• No action required.
32
Info. Vdisk verification has started.
Recommended actions
• No action required.
33
Info. Controller time/date has been changed. This event is logged before the change happens so the event
timestamp shows the "old" time. (May appear often if NTP is enabled.)
Recommended actions
• No action required.
34
Info. Controller has been restored to factory defaults.
Recommended actions
For an FC controller, restart it to make the default loop ID take effect.
•
37
Info. Vdisk reconstruction has started.
Recommended actions
• No action required. When complete, event 18 is logged.
6