HP P2000 Reference Manual page 47

5. Run verify-fix by entering:
verify vdisk vdisk fix yes
• When prompted for a pass code, enter: parity
• Wait 24 hours for this process to complete.
6. When verify-fix has completed, re-enable background scrub:
a. Log in to the CLI.
b. Enter:
set job-parameters background-scrub on
7. Create a full backup of all data in the vdisk. HP recommends enabling all available verification
options. Compare with the original backup.
If errors occur during this procedure, or if the parity errors were not corrected or are seen again within a
short period of time, place a call with HP support. To help expedite your case, provide logs gathered at the
beginning of this procedure to HP support and a current copy of the logs.
HP P2000 G3 MSA System Event Descriptions Reference Guide 47