HP P2000 Reference Manual page 35

416
Error Failed to delete the indicated replication set. This can occur if an invalid identifier was specified for the
replication set, or if the specified primary volume is not on the local system.
Recommended actions
• Repeat the deletion using a valid replication-set identifier, or on the local system for the primary volume.
417
Info. Automatically deleted the indicated snapshot to make space for a new snapshot or for a remote snapshot
proxy volume, or while changing the secondary volume to be the primary volume. The snapshot to delete
is determined by the snap-pool's policy.
Recommended actions
• No action required.
418
Warning A replication operation cannot complete because it needs to create a proxy volume or a replication
snapshot in the secondary vdisk, but the maximum number of volumes exists for that vdisk or its owning
controller and the vdisk contains no suitable snapshot to automatically delete.
This event is logged on the secondary volume's system only.
Recommended actions
• To enable the replication operation to continue, delete at least one unneeded volume from the
destination vdisk or from another vdisk owned by the same controller.
• After performing the above action, if the replication fails for the same reason and becomes suspended,
events 431 and 418 will be logged. Repeat the above action and resume the replication.
419
Info. Started to add the indicated secondary volume to the indicated replication set.
Recommended actions
• No action required.
420
Error Failed to add the indicated secondary volume to the indicated replication set. This can occur for several
reasons, such as:
• The volume is already a replication volume.
• The volume is not local to the system.
• The communication link is busy or experienced an error.
• The volume is not the same size as the existing volume or is no longer in the set.
• The volume record is not up to date.
• Replication is not licensed or the license limit would be exceeded.
Recommended actions
• If any of the above problems exist, resolve them. Then repeat the add operation with a valid volume.
421
Info. Completed adding the indicated secondary volume to the indicated replication set.
Recommended actions
• No action required.
HP P2000 G3 MSA System Event Descriptions Reference Guide 35