Continuous Sending - Kyocera TASKalfa 820 Operation Manual

Continuous Sending

Use the same settings from a previously completed transmission for the next transmission. The
scan function screen is returned with the sender (user), destination and other settings remaining
from the previous operation.
Item
On
Off
NOTE: To switch to continuous sending
from the scanner function screen, press
[Cont. TX to]. When continuous sending
is enabled, [Cont. TX to] changes to
[Single Scan]. To disable Continuous
Sending, press [Single Scan].
If Permit File Overwrite is checked in
Scanner File Utility (see page 3-8), files
with already existing names will be
overwritten. Exercise caution when
inputting file names during Continuous Sending mode.
When finished using Continuous Sending, always [Cancel] on the scanner function screen. If not
pressed, the scanner function screen may remain active, rendering the copy, print or fax functions
unusable. Also, exercise caution as unauthorized users may obtain access to the device while this
screen is displayed.
1 Referring to Accessing the Setting default function Screen on page 1-11, access the Setting default
function screen.
2
Press [] or [] to select Continuous Sending and press [Change #].
3 Select [On] or [Off].
4 Press [Close]. The display returns to the Setting default function screen.
File Name Entry
File Name Entry on page 1-5 configure the machine to display the filename input box without
displaying the auto/manual selection screen. Doing so allows this operation to be skipped each time
when entering filenames.
Item
Manual
Auto/Manual
1
Referring to Accessing the Setting default function Screen on page 1-11, access the Setting default
function screen.
2 Press [] or [] to select File Name entry and press [Change #].
3 Select [Manual] or [Auto/Manual].
4
Press [Close]. The display returns to the Setting default function screen.
Description
Enables Continuous Sending.
Disables Continuous Sending.
Scan to PC-Sending
Destination
Save at
User PC
Description
Displays the filename entry box without displaying the auto/manual selection
screen.
Displays the auto/manual selection screen.
Ready to scan.
Place the original and select destination .
Delete
Address
Book
Scanner Settings
Original
11×8½"
08/0
Register Prgrm Cont. TX to
Auto Top Edge
Select Orig. Set
Orig.Size Direction
Auto size 200dpi
Select Scanning
Send Size Resolution
Basic
Quality
1-15