Kyocera TASKalfa 820 Operation Manual page 35

Scan system (h) operation guide rev-1 (functions edition)
Hide thumbs Also See for TASKalfa 820:
Table of Contents

Advertisement

Extension
The setting items are as follows.
Setting Item
Value
Full scan
On, Off
Centering
On, Off
Uncompress
On, Off
scanning
Continuous
On, Off
sending
File name Input
Manual, Auto/Manual
Skip sender (user)
On, Off
select
Enter E-mail
On, Off
address
One page per file
On, Offf
Setting Scanner from a Web Browser
Description
With this mode, you can scan the
entire area of the selected original size
as image when this function is set to
"On". You can scan the original to one
size smaller when this function is set to
"Off". If you scan the original that is
filled its corner with the contents, a
photo and so on, this function is set to
"On".
When scanning with zoom, by
specifying the Original size and the
Send size, blank borders around the
bottom or left and right will be shown
depending on the sizes. When setting
Auto Center, the image is moved to the
center so that blank borders around
the top and bottom or left and right
become even.
This scanner uses MMR compression
when scanning image data. In this
case, when compressing the dots
(especially the closely spaced dots
which make up the more dense areas
of, for example, photographs in printed
material, and can be seen when
looking closely with a magnifying
glass) such as in photographs and
grayscale images, the resulting data
volume may actually be greater than
before it was compressed. You can
select whether or not to have
compression performed automatically
in cases such as these when the
compressed data is greater that the
original data.
Use the same settings from a
previously completed transmission for
the next transmission. The scan
function screen is returned with the
sender (user), destination and other
settings remaining from the previous
operation.
Displays the filename input box
without displaying the auto/manual
selection screen.
When using this scanner, a sender
(user) must be first selected. Set to On
to force the sender (user) to User No.
001 and skip sender (user) selection.
When Send E-mail, specify whether to
directly enter the mail address when
selecting recipients.
Creates and sends a separate file for
each page of a scanned original.
2-11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Taskalfa 620Scan system (h)

Table of Contents