Importing Images - Kyocera TASKalfa 820 Operation Manual

Importing Images

There are two main methods to use a TWAIN-compliant application to import images from the
scanner, and the operation method is as follows. Perform the image scanning method suitable to
your working requirements.
NOTE: See Scan System (H) Operation Guide Set up Edition for operation procedure details.
Starting Scanning from the Computer
1 Launch TWAIN Source from the TWAIN-compliant application on the computer.
2 Click the Scan. Setup button, check if it is selected and click the OK button.
NOTE: When the scanner is not selected, click the Edit button and select the scanner.
3 Click the TWAIN Source Connect(s) button.
NOTE: Connection may fail if the scanner is currently starting up or in use. If this happens, set
TWAIN mode from the scanner and click the Connect(s) button.
4 Set Waiting Scan and click the Scan button.
5
Place the original and press the Start key.
6 The scanned image is sent to the computer.
Starting Scanning from the Scanner
1 Set TWAIN mode from the scanner operation panel.
2 Place the originals.
3 Launch TWAIN Source from the TWAIN-compliant application on the computer.
4 Click the Scan. Setup button, check if it is selected and click the OK button.
NOTE: When the scanner is not selected, click the Edit button and select the scanner.
5 Click the TWAIN Source Connect(s) button.
6 Click the Scan button to begin scanning.
7 The scanned image is sent to the computer.
NOTE: You can change the resolution or original size settings from the computer or scanner. See
the following About the Main Dialog Box for configuring TWAIN Source at the computer. See Scan
System (H) Operation Guide Set up Edition for configuring from the scanner's operation panel.
Included Scanner Tools
3-45