Kyocera TASKalfa 820 Operation Manual page 37

Sender (User) Setting
Click the user number from the Sender (User) List to show the Sender (User) Setting screen.
Setting Item Description
Registration The number selected from the Sender List is shown here. This is shown for
Number to verify which number from the Sender Setting table is being added or
modified, and cannot be modified itself.
Registration Name Field to enter the Registration Name. When a name is entered here, it is
shown in the Sender Registration table and on the scanner device operation
panel. Enter a registration name less than 16 characters long.
E-mail Address Enter a Sender (User) e-mail address using less than 64 characters.
Address of Enter the address of the computer on which the Private Address Book
Address Book (included utility: Address Book for Scanner) has been installed. Enter the
installed PC hostname or IP address in 'XXX.XXX.XXX.XXX' notation.
Save Number Specify the PC save number for the destination PC for Scan to PC mode.
Specify a save number from 001 - 100.
Signature Line Enter signature data to be attached during e-mail transmission. Enter text less
than 256 characters long.
Change Password Set to Yes to change the password or No to leave unchanged.
New Password To change the password, enter the new password here using less than 8
characters.
Confirm New For verification, re-enter the same password as in the New Password field
Password above.
Setting Scanner from a Web Browser
2-13