Kyocera TASKalfa 820 Operation Manual page 29

Menu Frame
From the menu frame, select the desired configuration items for the scanner.
NOTE: Each item in the menu frame can be configured in succession. However, if the same item is
selected during configuration, settings made until then are lost.
Display Description
Home Select Home to return the browser to the top page for accessing the scanner.
System Setting System Setting is used to configure scanner related settings, and contains
the following items.
•
•
•
•
"Send E-mail" "Send E-mail" Setting is used to configure basic settings required for Send
Setting E-mail.
•
•
"Scan to PC" Use "Scan to PC" Setting to configure various settings for sending files to a
Setting computer (PC) for saving.
•
"Scan to FTP" "Scan to FTP" Setting is used to configure various settings for transferring
Setting files to FTP servers.
•
Main Frame
Displays the scanner system information. You can also change the display language.
NOTE: When launched, the default values are shown.
Display
Scanner Status
Information
Ethernet Address
Scanner Firmware
Network Firmware
Color Profile
Language
System Basic Setting: Configure settings related to the scanner's
network interface.
Scanner Default Setting: Configure default values for main scanner
functions.
Sender List: Configure the Sender (User) List for use with scanner
functions (Send E-mail, Scan to PC, Database Connection, Scan to FTP).
Reset: Reset the scanner or restore settings to their factory default
settings.
E-mail Basic Setting: Configure basic items related to Send E-mail.
Destination List: Register addresses for e-mail destinations.
Destination List: Register addresses for destination computers (PCs).
Destination List: Register FTP servers or other settings.
Description
When the top page scanner status changes to
Refresh button to verify the status of the system. When the scanner

status is OK, Ready to Scan is displayed.
The following 6 status results can be obtained from the scanner device.
Ready to Scan/Using Scanner/DP (Document Processor) Paper
Jam/System Error/Processing/Energy Save Mode
The scanner's MAC address will be displayed.
The scanner's firmware version will be displayed.
The scanner's network firmware version will be displayed.
The color profile filename compatible with this device will be displayed.
You can switch the language shown in the Web Page.
Setting Scanner from a Web Browser

OTHER, click the
2-5