Ending A Call; Putting A Call On Hold; Transferring A Call To Another Extension - Cisco 7912G User Manual

Making Telephone Calls

Ending a Call

Putting a Call on Hold

Note

Transferring a Call to Another Extension

Step 1
Step 2
Cisco IP Phone 7905G/7912G User Guide for Cisco CallManager
3-4
To return to the original call, press the Hold button. If the second call is still
active, it is put on hold when you return to the original call.
You can continue to use the Hold button to switch between the calls.
To create a conference call between yourself and the other two parties, press the
Confrn softkey.
To end a call, hang up the handset or press the EndCall softkey.
When you put a call on hold, the call remains active even though you and the other
party cannot hear each other. You can answer or place another call while a call is
on hold.
Engaging the Hold feature generates music or a beeping tone. For this reason,
avoid putting a conference call on hold.
To place a call on hold, press the Hold button. The hold button lights when a call
is on hold. To resume a call on hold, press the hold button again.
To transfer a call to another phone, follow these steps.
Procedure
During a call, press the Trnsfer softkey
The call is put on hold.
Dial the number or office extension to which you want to transfer the call.
Chapter 3 Placing a Call and Other Basic Phone Tasks
78-15080-02