Making Telephone Calls
Making Telephone Calls
Placing a Call
Cisco IP Phone 7905G/7912G User Guide for Cisco CallManager
3-2
These sections describe how you can place, answer, and otherwise manage a
telephone call:
•
Placing a Call, page 3-2
Answering a Call, page 3-3
•
Using Call Waiting, page 3-3
•
Ending a Call, page 3-4
•
•
Putting a Call on Hold, page 3-4
Redialing the Last Number Dialed, page 3-5
•
•
Storing and Retrieving a Call Using Call Park, page 3-5
Answering Calls on Another Extension Using Call Pickup, page 3-6
•
Table 3-1
lists the different ways you can place a call with your Cisco IP Phone.
Table 3-1
Placing a Call
If you want to...
Use the handset
Make a new call on the
current line
Dial with the phone on
hook
Chapter 3
Placing a Call and Other Basic Phone Tasks
Then...
Lift the handset and dial the number
After completing a call but before hanging up the
handset, press the NewCall softkey and dial the
number
From the main screen, perform either of these
actions:
Dial the number and lift the handset or press
•
the Dial softkey. The phone will not produce
a dial tone until after you lift the handset or
press the Dial softkey.
Press the NewCall softkey and dial the
•
number
78-15080-02