Using The Speaker - Cisco 7912G User Manual

Using the Speaker

Using the Speaker
Cisco IP Phone 7905G/7912G User Guide for Cisco CallManager
1-12
Figure 1-4 Using the Handset Rest
1
1
Set the handset aside and use your thumb and finger to grasp and pull out
the square plastic tab in the handset rest.
2 Rotate the tab 180 degrees.
3
Slide the tab back into the handset rest with the extension protruding from
the top of the tab.
Replace the handset in the rest. The tab hooks into a slot in the handset to
ensure that the handset will not slip out of the rest.
The Cisco IP Phone 7905G/7912G features a speaker for hands-free listening.
You can use the speaker only to listen to a call; to talk on a call, you must pick up
the handset.
• To switch from the handset to the speaker so that you can listen to a call
hands-free, press the Monitor softkey on the front of your phone during a
call, then hang up the handset. You will be able to hear the call, but you will
not be able to talk on the call.
Chapter 1
2 3
Introducing Your Cisco IP Phone
78-15080-02