Advertisement
Insert the wires and set the DIP switch using the table below. After setting the DIP
switch to ON, the relay output alarm will detect any power or port failures, and form a
short circuit. The alarm relay output is Normal Open.
Connecting Ethernet Ports
All Ethernet ports support auto MDI/MDIX.
Connect an Ethernet cable into the PoE port of RocketLinx ES7105 switch and the
appropriate network device. The LNK / ACT LED will turn Yellow for 10M Ethernet or
Green for 100M Ethernet. The four PoE ports ( PoE 1 to PoE 4) support PoE OUT. If
the PoE port LED is lit, it indicates that the RJ45 connector has been successfully
connected to a IEEE 802.3af enabled Power Device.
Advertisement
