Broadcasting (Monochrome Only) - Brother MFC-5890CN User Manual

Broadcasting
(Monochrome only)
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups,
One Touch, Speed Dial numbers and up to
50 manually dialled numbers in the same
broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
a
Press (Fax).
b
Load your document.
c
Press a or b to choose Broadcasting.
Press OK.
d
You can add numbers to the broadcast
in the following ways:
Press a or b to choose Add Number
and enter a number using a dial pad.
Press OK.
Press a or b to choose Phone Book
and OK. Press a or b to choose
Alphabetical Order or
Numerical Order and OK. Press
a or b to select a number and OK.
Note
One Touch Dial locations begin with l.
Speed Dial locations begin with #.
e
After you have entered all the fax
numbers by repeating step d, press
a or b to choose Complete.
Press OK.
f
Press Mono Start.
Note
5
• If you did not use up any of the numbers
for Groups, you can 'broadcast' faxes to
as many as 216 (MFC-5890CN) or
256 (MFC-6490CW) different numbers.
• The available memory will vary depending
on the types of jobs in the memory and the
number of locations used for
broadcasting. If you broadcast to the
maximum numbers available, you will not
be able to use dual access and delayed
fax.
• If the memory is full, press Stop/Exit to
stop the job. If more than one page has
been scanned, press Mono Start to send
the portion that is in the memory.
Sending a Fax
5
43