Section Ii Fax; Sending A Fax; Entering Fax Mode; Faxing From The Adf - Brother MFC-5890CN User Manual

5

Sending a Fax

Entering Fax mode

When you want to send a fax, or change fax
send or receive settings, press the
(Fax) key to illuminate it in blue.
The LCD shows:
Fax Resolution
Contrast
Glass ScanSize
Phone Book
FAX
Press a or b to scroll through the Fax key
options. Some functions are only available
when sending monochrome faxes.
Fax Resolution (See page 45.)
Contrast (See page 45.)
Glass ScanSize
(MFC-5890CN: See page 41.)
(MFC-6490CW: See page 42.)
Phone Book (See page 75.)
Outgoing Call (See page 76.)
Caller ID hist. (See page 77.)
Broadcasting (See page 43.)
Delayed Fax (See page 46.)
Batch TX (See page 47.)
Real Time TX (See page 46.)
Polled TX (See page 89.)
Polling RX (See page 87.)
Overseas Mode (See page 46.)
Set New Default (See page 47.)
Factory Reset (See page 47.)
When the option you want is highlighted,
press OK.
40
5
Standard
Auto
A4
Fax Press Start

Faxing from the ADF

a
Press (Fax).
b
Place the document face up in the ADF.
(See Using the ADF on page 22.)
c
Enter the fax number using the dial pad,
One Touch, Speed Dial or Search.
Note
You can preview a fax message before
sending it by pressing Fax Preview.
(See How to preview an outgoing fax
on page 42.)
d
Press Mono Start or Colour Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If you send a mono fax when the memory
is full it will be sent in real time.
• You can send colour faxes up to A4 in size.
5
5