11
Making copies
How to copy
Entering Copy mode
When you want to make a copy, press
(Copy) to illuminate it in blue.
The LCD shows:
01
1
Quality
Enlarge/Reduce
Ratio:
Tray Select
COPY
1 No. of Copies
You can enter the number of copies you want
by using the dial pad.
Press a or b to scroll through the Copy key
options.
Quality (See page 93.)
Enlarge/Reduce (See page 93.)
Tray Select (MFC-6490CW)
(See page 97.)
Paper Type (See page 97.)
Paper Size (See page 97.)
Brightness (See page 96.)
Contrast (See page 97.)
Stack/Sort (See page 96.)
Page Layout (See page 94.)
Skew Adjustment (MFC-6490CW)
(See page 98.)
Book Copy (See page 98.)
Watermark Copy (See page 99.)
Set New Default (See page 100.)
Factory Reset (See page 100.)
When the option you want is highlighted,
press OK.
92
11
11
Normal
100%
Tray#1
Copy
Press Start
Note
• The default setting is Fax mode. You can
change the amount of time that the machine
stays in Copy mode after the last copy
operation. (See Mode Timer on page 26.)
• Book Copy and Watermark Copy
features are supported by technology
from Reallusion, Inc.
Making a single copy
a
Press
(Copy).
b
Load your document.
(See Loading documents on page 22.)
c
Press Mono Start for B&W copy or
Colour Start for colour copy.
Making multiple copies
You can make up to 99 copies in one print
run.
a
Press
(Copy).
b
Load your document.
(See Loading documents on page 22.)
c
Enter the number of copies you want.
d
Press Mono Start for B&W copy or
Colour Start for colour copy.
Note
To sort the copies, press a or b to choose
Stack/Sort. (See Sorting copies using
the ADF on page 96.)
Stop copying
To stop copying, press Stop/Exit.
11
11
11
11