Brother MFC-5890CN User Manual page 123

Remove Red-Eye
The machine detects eyes in your photos and
will attempt to remove red-eye from your photo.
Note
There are some cases when red-eye may
not be removed.
• When the face is too small in the image.
• When the face is turning too far up,
down, left or right.
a
Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
b
Press a or b to choose
Enhance Photos.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose
Remove Red-Eye.
Press OK.
When Remove Red-Eye is
successful, the photo with the effect
is shown. The adjusted part is shown
in a red frame.
When Remove Red-Eye is
unsuccessful,
Unable to Detect. is shown.
Press OK to go back to the previous
level.
Note
Press # to try Remove Red-Eye once
again.
e
Press OK and a or b to increase or
decrease the number of copies.
f
Do one of the following.
Press OK and change the print
settings. (See page 114.)
If you do not want to change any
settings, press Colour Start to print.
Printing photos from a memory card or USB Flash memory drive
Monochrome
12
You can convert your photo to monochrome.
a
b
c
d
e
f
Sepia
You can convert the colour of your photo to sepia.
a
b
c
d
e
f
Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
Press a or b to choose
Enhance Photos.
Press OK.
Press d or c to choose your photo.
Press OK.
Press a or b to choose Monochrome.
Press OK.
Press OK and a or b to increase or
decrease the number of copies.
Do one of the following.
Press OK and change the print
settings. (See page 114.)
If you do not want to change any
settings, press Colour Start to print.
Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
Press a or b to choose
Enhance Photos.
Press OK.
Press d or c to choose your photo.
Press OK.
Press a or b to choose Sepia.
Press OK.
Press OK and a or b to increase or
decrease the number of copies.
Do one of the following.
Press OK and change the print
settings. (See page 114.)
If you do not want to change any
settings, press Colour Start to print.
12
12
12
111