Delayed Batch Transmission (Monochrome Only); Checking And Cancelling Waiting Jobs; Setting Your Changes As A New Default; Restoring All Settings To The Factory Settings - Brother MFC-5890CN User Manual

Brother - network-ready multifunction printer/ copier/ scanner/ fax
Hide thumbs Also See for MFC-5890CN:
Table of Contents

Advertisement

Delayed Batch Transmission
(Monochrome only)
Before sending the delayed faxes, your
machine will help you economize by sorting
all the faxes in the memory by destination and
scheduled time. All delayed faxes that are
scheduled to be sent at the same time to the
same fax number will be sent as one fax to
save transmission time.
a
Press
(Fax).
b
Press a or b to choose Batch TX.
c
Press d or c to choose On.
Press OK.
d
Press Stop/Exit.
Checking and cancelling
waiting jobs
You can check which jobs are still waiting in
the memory to be sent and cancel a job. (If
there are no jobs, the LCD shows
No Jobs Waiting.)
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Remaining Jobs.
Press OK.
Any waiting jobs appear on the LCD.
d
Press a or b to scroll through the jobs
and choose the job you want to cancel.
Press OK.
e
Do one of the following:
To cancel, press 1 to choose Yes.
If you want to cancel another job go
to step d.
To exit without cancelling, press 2 to
choose No.
f
When you have finished, press
Stop/Exit.
Setting your changes as a
new default
5
You can save the fax settings for
Fax Resolution, Contrast,
Glass ScanSize and Real Time TX you
use most often by setting them as default.
These settings will stay until you change
them again.
a
Press
b
Press a or b to choose the menu option
that you want to change. Press d or c to
choose your new setting.
Repeat this step for each setting you
want to change.
c
After changing the last setting, press
a or b to choose Set New Default.
Press OK.
5
d
Press 1 to choose Yes.
e
Press Stop/Exit.
Restoring all settings to the
factory settings
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a
Press
b
Press a or b to choose
Factory Reset.
Press OK.
c
Press 1 to choose Yes.
d
Press Stop/Exit.
Sending a Fax
(Fax).
(Fax).
5
5
5
47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-6490cw

Table of Contents