Setting Up And Changing The Public User - Brother MFC-5890CN User Manual

Chapter 4
Changing the password
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose
Function Lock.
Press OK.
d
Press a or b to choose Set Password.
Press OK.
e
Enter the registered four-digit password.
Press OK.
f
Enter a four-digit number for the new
password.
Press OK.
g
If the LCD shows Verify:, re-enter the
new password.
Press OK.
h
Press Stop/Exit.
34
Setting up and changing the
4
Public user
Public users do not need to enter a password.
You can set up one Public user.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose
Function Lock.
Press OK.
d
Press a or b to choose Setup User.
Press OK.
e
Enter the administrator password.
Press OK.
f
Press a or b to choose Public.
Press OK.
g
Do one of the following:
To set up the Public user, press
d or c to choose Enable or
Disable for Fax Tx. After you have
set Fax Tx, press a or b to choose
the settings for Fax Rx,
Copy(Color), Copy(B&W), Scan,
Print and PCC by repeating this
step.
Press OK
To change the Public user setting,
press a or b to choose the setting
you want to change.
Press d or c to choose Enable or
Disable.
Repeat this step until you finish
changing settings.
Press OK
Note
If you disable PC Print and PhotoCapture
printings (PCC) for Public users it will also
disable those functions for all restricted
users.
h
Press Stop/Exit.
4