Brother MFC-5890CN User Manual page 25

Note
If you are using Ledger, Legal or A3 size
paper, press and hold the universal guide
release button (1) as you slide out the
front of the paper tray.
d
Fan the stack of paper well to avoid
paper jams and misfeeds.
Note
Always make sure that the paper is not
curled.
e
Gently put the paper into the paper tray
print side down and top edge in first.
Check that the paper is flat in the tray
and below the maximum paper
mark (1).
1
f
Gently adjust the paper side guides with
both hands to fit the paper stack.
Make sure the paper side guides touch
the sides of the paper.
1
Note
Be careful that you do not push the paper
in too far; it may lift at the back of the tray
and cause feed problems.
g
Put on the paper tray cover.
h
Slowly push the paper tray back into the
machine.
Loading paper and documents
2
13