Table of Contents
Advertisement
Display system information
System information displays the model, MAC address, and the version levels for firmware, boot
code, and POST code in the Digi device. It also displays memory available: total, used, and free,
and tracks CPU percent utilization and the uptime.To display system information, from the main
menu, click Administration > System Administration. Select General, GPIO, Serial or
Network for the appropriate information.
Reboot the Digi device
Some changes to configuration settings require saving the changes and rebooting the Digi device.
To reboot, from the main menu, click Administration > Reboot. Click the Reboot button, and
wait approximately 1 minute for the reboot to complete.
Enable/disable access to network services
As needed, enable and disable access to various network services, such as ADDP, SNMP, and
Telnet. For example, for security or performance reasons, it may be desired to disable services that
are not necessary for running or interfacing with the Digi device. In the Java applet interface,
enabling and disabling network services is done on the Network Services tab of the Network
Configuration page. See "Network configuration settings" on page 64.
D i g i d e v i c e a d m i n i s t r a t i o n
1 6 1
Hide quick links:
Advertisement
Table of Contents
