Digi TS 8 MEI User Manual page 113

Add users
Digi Connect Family products allow multiple users to be defined. For those products, the Users
Configuration page shows the currently defined users and allows you to add more user
definitions. To add a user definition:
1 On the Main menu, click Users.
On the Users Configuration page, click New.
2
On the Add New Users page, specify the user name and password to be used for login. The
3
password can be from 4 through 16 characters long and is case-sensitive. Confirm the
password, and click Apply. The changes take effect immediately. No logout/login is
necessary.
User access settings
For Digi devices with the two-user or more-than-two-users model, user access to the device
interfaces is configurable. For example, the administrative user can access both the command line
and web interface, but other users can be restricted to the web interface only.
Take care in changing access settings. If you are logged in as the administrative user and disable
web interface, you will not be able to log in to the Digi device on your next attempt, and there is no
way to raise your user permissions to enable the web interface again. You must reset the device to
factory defaults to enable the web interface access.
To set access settings:
On the Main menu, click Users.
1
On the Users Configuration page's list of users, click on the user.
2
On the User Access page, enable or disable the device interface access as desired:
3
– Allow command line access: Enables or disables access to the command line.
– Allow web interface access: Enables or disables access to the web interface.
4 Click Apply. The changes take effect immediately. No logout/login is necessary.
C o n f i g u r e D i g i d e v i c e s
1 1 3