Digi TS 8 MEI User Manual page 185

LED/button Color and
Light Pattern
Ethernet Uplink Solid green
LED
Blinking green
Off
Ethernet Switch Solid green
LEDs
Blinking green
Off
Serial LED Solid green
Blinking green
Off
Find Me/Locator Blinking amber
LED
Off
Power Green
Off
Ethernet Uplink connection is up but no traffic is on the line.
Traffic is on the Ethernet Uplink connection.
Ethernet Uplink connection is disconnected.
Ethernet Switch connection is up but there is no activity on the line.
Ethernet activity is on the Ethernet Switch connection
Ethernet Switch connection is not in use.
Serial connection is up but no traffic is on the line.
Serial connection is up and traffic is on the serial port.
Serial connection is not in use
Can be used as an aid in finding a specific device among a group of devices. The LED
can be turned on and off from theDigi device's command line and web interfaces.
From the command line, issue the findme blink={on|off} command.
From the web interface, go to Administration > Activate Find Me LED. Once the
LED is enabled, the menu item changes to Stop Find Me LED which can be used to
turn off the LED.
Find Me LED is deactivated.
Power is on.
Power is off.
T r o u b l e s h o o t i n g
Description
1 8 5