Alarms; Security Features - Digi TS 8 MEI User Manual

Alarms

To configure alarms in the Java Applet interface, go to Management > Alarms.
The checkbox at the top of the screen shows whether alarms are currently enabled or disabled.
The Email Server Information fields show the IP address of the email server used to send emails
when conditions that trigger an alarm occur, and the text to include in the "from" field of an alarm-
triggered email.
The Alarm List shows all the alarms that are currently defined for a device.
There are several differences for alarm configuration in the Java applet.
Alarms can be configured to be sent as email messages only. They cannot be sent as SNMP traps.
The alarm configuration either needs to be overridden by toggling to the default web UI or by
issuing a followup set alarm command from the command-line interface.
The method for specifying trigger conditions differs from the one in the web interface, where each
trigger condition has a combo box for selecting the condition. In the Java applet, conditions are
defined by specifying one of the following values:




Security features

To configure security features, click the Security link. Configurable security features are limited to
specifying whether password authentication is required for the Digi device, and the user name and
password required for logging on to the Digi device.
X: Ignore
1: High
0: Low
C o n f i g u r e D i g i d e v i c e s
1 3 0