Digi TS 8 MEI User Manual page 76

Service
Telnet Server
Telnet Passthrough
Transmission Control Protocol (TCP)
Echo
Transmission Control Protocol (TCP)
Passthrough
User Datagram Protocol (UDP) Echo
User Datagram Protocol (UDP)
Passthrough
Web Server, also known as HyperText
Transfer Protocol (HTTP)
Secure Web Server, also known as
HyperText Transfer Protocol over Secure
Socket Layer (HTTPS)
Services provided
Allows users an interactive Telnet session to the Digi device's
command-line interface.
If disabled, users cannot Telnet to the device.
Allows a Telnet connection directly to the serial port, often referred to
as reverse Telnet.
Used for testing the ability to send and receive over a TCP connection,
similar to a ping.
Allows a raw socket connection directly to the serial port, often
referred to as reverse sockets.
Used for testing the ability to send and receive over a UDP connection,
similar to a ping.
Allows raw data to be passed between the serial port and UDP
datagrams on the network.
Access to web pages for configuration that can be secured by requiring
a user login.
HTTP and HTTPS, below, are also referred to as Web Server or
Secure Web Server. These services control the use of the web
interface. If HTTP and HTTPS are disabled, device users cannot use
the web interface or Java applet to configure, monitor, and administer
the device.
Access to web pages for configuration that can be secured by requiring
a user login, with encryption for greater security.
C o n f i g u r e D i g i d e v i c e s
Default
network
port
number
23
2001
7
2101
7
2101
80
443
7 6