Connection Settings - Tcp; Figure 5-7. Tcp Connection Settings - Lantronix UDS1100 User Manual

Connection Settings - TCP

To configure a channel's TCP settings:
1. On the main menu, click Connection. The Connection Settings window for the
channel displays.
2. In the available fields, enter or modify the following information:
Connect Protocol
Protocol
Connect Mode: Passive Connection
Accept Incoming
Password Required
Password
Modem Escape Sequence
Pass Through
UDS1100 User Guide

Figure 5-7. TCP Connection Settings

From the drop-down menu, select TCP.
Select Yes to accept incoming connections. The default
setting is Yes.
Determines whether a password is required for an incoming
passive connection. This field is not available when a
password is set for Telnet mode. The default setting is No.
If Password Required was set to Yes, enter the password
for passive connections.
Disable or enable the UDS's ability to send the escape
sequence. The default is Yes (send the escape sequence).
5: Configuration Using Web-Manager
31