Connection Settings - Tcp - Lantronix WiPort User Manual

With Passive Connect
At Time of Disconnect
Flush Output Buffer (Network to Serial)
With Active Connect
With Passive Connect
At Time of Disconnect
3. When you are finished, click the OK button.
4. On the main menu, click Apply Settings.

Connection Settings - TCP

To configure a channel's TCP
1. From the main menu, click Connection for either Channel 1 or Channel 2 to
display the Connection Settings page for the selected channel.
2. In the available fields, enter the following information:
Connect Protocol
Protocol
WiPort Embedded Wireless Device Server User Guide
4: Configuration Using Web Manager
Select Yes to clear the input buffer with a connection initiated
from the network to the device.
Select Yes to clear the input buffer when the network
connection to or from the device is disconnected.
Select Yes to clear the output buffer with a connection that is
initiated from the device to the network.
Select Yes to clear the output buffer with a connection initiated
from the network to the device.
Select Yes to clear the output buffer when the network
connection to or from the device is disconnected.
settings:
Select TCP from the pull down menu.
32