1: Using This Guide; Purpose And Audience; Chapter Summary - Lantronix UDS1100 User Manual

1: Using This Guide

Purpose and Audience

This guide provides the information needed to configure, use, and update the UDS1100
device server. It is for system administrators and those responsible for installing and
maintaining the UDS.

Chapter Summary

The remaining chapters in this guide include:
Chapter
2: Introduction
3: Installation of UDS1100
4: Configuration Using Web-
Manager
5: Configuration via Telnet or
Serial Port (Setup Mode
6: Setup Mode: Server
Configuration
7: Setup Mode: Channel
Configuration
8: Setup Mode: Advanced
Settings
9: Firmware Upgrades
10: Monitor Mode
A: Troubleshooting and
Contact Information
B: Connections and Pinouts
C:Technical Specifications
D: Mounting Brackets
E: Alternative Ways to Assign
an IP Address
UDS1100 User Guide
Description
Describes the main features of the UDS and the protocols it
supports.
Provides information for installing your unit and getting it up and
running using DeviceInstaller or a serial port connection.
Details using the Web-Manager to set parameters such as port
and server properties.
Provides instructions for accessing Setup Mode (command line
interface) using a Telnet connection through the network or a
terminal or terminal emulation program through the serial port.
Details the network (server) settings
Details the serial port settings.
Details expert and security settings and explains how to reset the
unit to factory default values.
Provides instructions for obtaining the latest firmware and updating
the UDS.
Provides instructions for accessing and using the command line
interface to monitor the network and diagnose problems.
Describes common problems and error messages and how to
contact Lantronix Technical Support.
Provides descriptions and illustrations of connection hardware.
Lists technical specifications for the UDS.
Provides drawings and dimensions of the unit's mounting brackets.
Provides detailed information about using DHCP, AutoIP, BOOTP
ARP, and Telnet to assign an IP address.
8