Configuring Mass Storage; Mass Storage Indicator Lights - HP D5970A - NetServer - LCII User Manual

4 Configuring Mass Storage

The HP NetServer LD Pro chassis contains three horizontal mass storage shelves
and a hot swap subsystem with three hot swap shelves. There are also openings
in the chassis for connectors to provide connection to optional exterior mass
storage subsystems. The NetServer LD Pro can be configured to accommodate a
number of different configurations.
NOTE For cabling configuration information, see the Technical
Information Label on the mass storage side of the chassis
and Information Assistant on the HP NetServer Navigator
CD-ROM.

Mass Storage Indicator Lights

On the front of the NetServer are a number of lights, shown in Figure 4-1, that
indicate the status of the mass storage devices and controllers.
Hard disk activity light 1
Yellow = Embedded SCSI A or IDE bus active
Figure 4-1. Mass Storage Indicator Lights
Flexible disk drive activity light
Yellow or Green = disk drive active
CD-ROM drive activity light
Green = power on
Yellow = drive active
Blinking = drawer opening or closing
Hard disk status light
Green = drive powered on
Flash yellow = drive error
All drives flash simultaneously
Flash yellow = temperature warning
Flash red = temperature emergency
Hard disk activity light
Green = drive active
19