Installing Hp Information Assistant Software; Installing From The Cd-Rom; Installing From The Network - HP D5970A - NetServer - LCII User Manual

Chapter 3

Installing HP Information Assistant Software

HP Information Assistant runs on an HP Vectra or other PC running Windows
3.1 and above, Windows 95 or Windows NT. HP Information Assistant can be
installed in one of two ways:
From the CD-ROM
From a Network Server on which the HP Information Assistant
application files are installed
The installation program gives you the option of accessing the data files from
your hard disk or from the CD-ROM. The default is to access the data files from
the CD-ROM. You can copy the data files to your hard disk to improve access
time, but this could take up a significant amount of disk space.

Installing from the CD-ROM

To install HP Information Assistant from the HP NetServer Navigator CD-ROM,
perform the following steps:
1. Turn on your computer and CD-ROM drive.
2. Run Windows and display the Program Manager.
3. Insert the HP NetServer Navigator CD-ROM into the CD-ROM drive.
4. From Program Manager, select the File menu and choose "Run."
5. At the command prompt, type the following:
{drive}:\infoasst\setup /a
where {drive} is the letter of the CD-ROM drive.
6. Follow the instructions that appear on your screen.
In Program Manager, the Setup Program creates a new program group called HP
NetServer Information Assistant, with an icon for running the application.

Installing from the Network

To install the HP NetServer Information Assistant from a network, you must first
install the run-time files onto a network hard disk from the CD-ROM, and then
run setup on the client PC.
If you plan to let multiple users run the HP NetServer Information Assistant from
the network, it is advisable to copy the data files to the network.
16
HP NetServer Information Assistant