HP D5970A - NetServer - LCII User Manual page 12

Chapter 1
3. If the HP NetServer Navigator CD-ROM is not loaded in the CD-ROM
drive, insert the CD-ROM into the CD-ROM drive now and press the
Reset button on the front of the server. The HP NetServer automatically
boots from the HP NetServer Navigator CD-ROM.
If an error message appears, ignore it and press the F1 key. If an error
message appears in Configuration Assistant, press F10 to continue.
4. Go to the HP NetServer Navigator Main Menu and select "Configuration
Assistant."
5. Recommended: If you have installed all accessories except the ISA boards,
go to the Express Configuration Menu. Follow the instructions on the
screen to configure your HP NetServer.
You are finished with the Installation Road Map. Follow the instructions in
Configuration Assistant to continue your NetServer installation.
NOTE If you are installing one accessory at a time, go to the Custom
Configuration Menu and select the Help button. Follow the
instructions on the screen to configure your HP NetServer.
Repeat configuration process for each accessory.
6
Installation Overview