Setting The Monitor Type; Figure 1-1; Figure 1-6; Figure 1-7 - HP Visualize b1000 - Workstation Handbook

Boot Console Handler
Displaying and Setting the Monitor Type

Setting the Monitor Type

You can set the monitor type for a graphics adapter by typing the following at the prompt
and pressing :
Enter
Configuration Menu: Enter command> monitor graphics( n ) tt
Where n is the number of the graphics adapter and tt is the monitor type. To display a list
of supported monitors that are used by the graphics card, type the following command at
the prompt and press
Configuration Menu: Enter command> monitor list
A list of valid monitor types similar to the following is displayed:
MONITOR INFORMATION
Path Slot Head Type
---- ---- ---- ----
GRAPHICS(2) 2
GRAPHICS(2) 2
GRAPHICS(2) 2
GRAPHICS(2) 2
GRAPHICS(2) 2
GRAPHICS(2) 2
GRAPHICS(2) 2
GRAPHICS(2) 2
GRAPHICS(2) 2
GRAPHICS(2) 2
GRAPHICS(2) 2
GRAPHICS(2) 2
GRAPHICS(2) 2
GRAPHICS(2) 2
GRAPHICS(2) 2
Configuration Menu: Enter command>
To set the monitor type for GRAPHICS(2) to monitor type 1 type the following at the
command prompt and press
Config Menu: Enter command> monitor graphics(2) 1
This will take effect on the next reboot.
MONITOR INFORMATION
Path Slot
----- ----- ----- ------
GRAPHICS(2) 2
Configuration Menu:
172
:
Enter
Size
--------- ---- -----
1 1 1280x1024 75Hz PCI
1 2 1280x1024 75Hz PCI, Double buffered
1 3 1280x1024 75Hz PCI, Greyscale
1 4 1280x1024 75Hz PCI, Double buffered, Greyscale
1 5 1280x768
1 6 800x600
1 7 640x480
1 8 1600x1200 75Hz PCI
1 9 1600x1200 75Hz PCI, Greyscale
1 10 1200x1600 75Hz PCI
1 11 1200x1600 75Hz PCI, Greyscale
1 12 1280x1024 72Hz
1 13 1280x1024 72Hz Double buffered
1 14 640x480
1 15 ---------- user defined -----------
:
Enter
Head HPA
----------- ------ ---
1 fffa000000
Enter command>
Freq Class
75Hz PCI
75Hz PCI
75Hz PCI
60Hz
Resolution Freq
1280x1024 75Hz
Type Class
-------
1 PCI
Chapter 6