HP Visualize b1000 - Workstation Handbook page 81

Table 3-2. Chassis Codes for B1000/C3000 Workstations
Ostat Code FRU
OFF CBD0 IO BD
OFF CBD2 IO BD
OFF CBD4 IO BD
OFF CBD6 IO BD
OFF CBD8 IO BD
OFF CBDA IO BD
OFF CBDC IO BD
OFF CBDD IO BD
OFF CBDE IO BD
OFF CBE0 IO BD
OFF CBE2 IO BD
OFF CBE3 IO BD
OFF CBE6 SYS BD
OFF CBE7 IO BD
OFF CBE8 SYS BD
OFF CBE9 IO BD
FLT CBF0 SYS BD
FLT CBF1 SYS BD
Chapter 3
Message
R2PCI T-Abort;OV
PCI parity err
PCI par err; OV
PCI no DEVSEL#
PCI no DEVSEL;OV
PCI target abort
PCI T-Abort; OV
PCI assrts LOCK#
PCI LOCK#; OV
PCI assrts SERR#
PCI SERR#; OV
Unknown PCI err
AtoE rope perr
R2PCI intrnl err
AtoE rope perr
Unknown Rope err
HPMC initiated
no OS HPMC IVA
Description
Rope-to-PCI bridge signalled multiple
Target Aborts.
PCI address/command parity error.
Multiple PCI address/command parity
errors.
No PCI device selected (DEVSEL#
assertion). I/O error log word 3 contains
the error address.
Multiple DEVSEL# assertions. I/O error
log word 3 contains the error address.
A PCI device signalled Target Abort. I/O
error log word 3 contains the error
address.
A PCI device signalled multiple Target
Aborts. I/O error log word 3 contains the
error address.
A PCI device asserted LOCK#.
A PCI device asserted LOCK# multiple
times.
A PCI device asserted SERR#: address
parity error or other system error.
A PCI device asserted SERR# multiple
times.
Unknown PCI error detected.
Parity error between system I/O controller
and Rope-to-PCI bridge.
Rope-to-PCI bridge internal data error.
Command parity error between system
I/O controller and Rope-to-PCI bridge.
Unknown rope error occurred.
A High-Priority Machine Check entered
the firmware HPMC handler.
There is no HPMC vector for the
operating system. Firmware will halt the
CPU, requiring a power cycle to recover.
Troubleshooting
Selftest Failures
81