HP Visualize b1000 - Workstation Handbook page 202

SCSI Connections
The following topics are covered within this section:
• SCSI bus differences
• SCSI restrictions
• Determining SCSI bus length
• Assigning SCSI device IDs
• Connecting to the SCSI ports
If you are on a B1000/C3000 workstation, the instructions in this chapter assume you are
using HP-UX 10.20 operating system and Workstation Additional Core Enhancements for
HP-UX 10.20 (June 1999) with HP CDE (Common Desktop Environment). If you are on a
C3700 workstation, the instructions in this chapter assume you are using HP-UX 11.0 and
Workstation Additional Core Enhancements (ACE) for HP-UX 11.0 (November, 1999) or
HP-UX 11i operating system and the Hardware Enablement Bundle (HWE) for HP-UX 11i
(June, 2001) with HP CDE (Common Desktop Environment).
NOTE When attaching external SCSI devices, be sure to terminate the last device on
the external SCSI bus. The terminators are shipped with the B1000/C3000
workstations.
202 Appendix B