I/O Cards - HP Visualize b1000 - Workstation Handbook

I/O Cards

There are six I/O slots located on the rear panel of the B1000 and C3000 workstations.
Slots 1 through 4 are full-size PCI slots. Slots 5 and 6 are half-size Peripheral Connect
Interface (PCI) slots. See Figure 2-5. for a brief description of slot capabilities.
Figure 2-5. PCI Card Slot Numbering and Capabilities
To maintain good graphics performance, you should always use slot 2 (SL2) as your
primary graphics card slot and slot 4 (SL4) as your secondary graphics card slot.
NOTE
If you connect your monitor to a different graphics card slot, you will need to
change the graphics path for that monitor. To do this see the section,
"Displaying and Setting the Monitor Type" in Chapter 6, Boot Console
Handler in this document.
See the section titled "I/O Cards" on page 106 for details on installing I/O cards.
Chapter 2
Configuration
FRU Configurations
45