Conserving Battery Power in Windows 95
Select StartÅSettingsÅControl PanelÅPower. Then:
On the Battery Conservation Settings tab, select the High
battery conservation level or select the Custom battery
conservation level, then enter even lower settings.
On the Disk Drives tab, set a low When Powered By
Batteries timeout for the disk drive.
If you are using a PC Card modem, click the PC-Card
Modems tab, then select the Turn Off PC-Card Modems
When Not in Use check box.
If Infrared Monitor is enabled, select StartÅSettingsÅControl
PanelÅInfraredÅOptions tab, then clear the Search for and
Provide Status for Devices in range check box.
IMPORTANT:
check box is cleared. For more information about infrared,
refer to Chapter 8.
If a CD or DVD drive is in the system, clear the Auto insert
notification check box.
Conserving Battery Power in Windows 98
Select StartÅSettingsÅControl PanelÅPower
ManagementÅPower Schemes tab, then create a power
scheme that conserves battery power.
Select StartÅSettingsÅControl PanelÅPower
ManagementÅBattery Conservation Settings. Then select a
low screen brightness.
Select the infrared icon in the task barÅOptions tab, then
clear the Search for and Provide Status for Devices in range
check box.
IMPORTANT:
check box is cleared. For more information about infrared,
refer to Chapter 8.
You cannot establish an infrared link while this
You cannot establish an infrared link while this
Managing Power 4-25