Compaq Armada e500 - Notebook PC Quick Reference Manual page 148

Custom Test—Performs maximum testing on a selected
device.
To run all tests listed beneath your selection, select the
Check All button.
To run only the tests you select, select the Uncheck All
button, then select the check box beside each test you
want to run.
5. Select a test mode.
Interactive Mode—Provides maximum control over the
testing process. You determine whether the test was passed
or failed and may be prompted to insert or remove devices.
Unattended Mode—Does not display prompts. If errors are
found, they are displayed when testing is complete.
6. Select the Begin Testing button.
7. Access the test information. To view test information, select a
report.
Status tab—Summary of the tests run, passed, and failed
during the current testing session.
Log tab—Lists tests run on the computer, the numbers of
times each test has run, the number of errors found on each
test, and the total run time of each test.
Error tab—Lists all errors found on the computer with
their error codes.
8. To save
Test information—Select the Save button on the Log tab.
Error reports—Select the Save button on the Error tab.
9. To close Compaq Diagnostics for Windows, select FileÅExit.
Computer Setup and Diagnostics Utilities 15-7