Setting Power Preferences In Windows 95 And Windows Nt 4.0 - Compaq Armada e500 - Notebook PC Quick Reference Manual

Setting Power Preferences
in Windows 95 and Windows NT 4.0
Refer to the following table for procedures on setting power
preferences.
Preference
Select a preset level of power
use that applies whenever the
computer is running on a
battery pack.
NOTE: A battery conservation
level can also be displayed and
selected with the Fn+F7 hotkeys.
Create a level of power use that
applies settings for the following
whenever the computer is
running on a battery pack
Suspend timeout
System idle timeout
Processor speed
Screen brightness
Enable/disable low-battery
warning beeps.
Set Hibernation timeout.
Exit Suspend after a user-
selected timeout.
4-16 Managing Power
Procedure from Control Panel
Select Power (or Compaq Power)Å
Battery Conservation Settings tab,
then select a conservation level:
High provides maximum battery
conservation.
Medium balances battery
conservation and system
performance.
None (drain) provides maximum
power.
Select Power (or Compaq Power)Å
Battery Conservation Settings tab.
Select Custom, then enter your
preferences.
NOTE: Although a battery conservation
level can be displayed and selected
with the Fn+F7 hotkeys, Custom level
preferences must be entered on the
Battery Conservation Settings tab.
Select Power (or Compaq Power)Å
Battery Conservation Settings tab,
then select the On or Off radio
button.
Select Power (or Compaq Power)Å
Hibernation tab, then select a timeout
from the Timeout drop-down list.
NOTE: This setting does not affect
system-initiated Hibernation during a
critical low-battery condition.
Select Power (or Compaq Power)Å
Resume Timer tab. Select the
Enabled check box, then select a
date from the Date drop-down list
and a time from the Time drop-down
list.
Continued